Great Tips For Finishing Your Drywall

Now that you’ve managed to install your drywall without any major incidents, the next thing that you have to work hard on is to put in a perfect finish. You need to consider that this is a major stumbling block for all do-it-yourselfers. It would seem next to impossible to put in a great finish for your drywall but before you start tearing your hair out, you will see that there are a lot of drywall finishing tips that you can learn which will be able to get you a great finish on your drywall.

You need to keep in mind that when finishing your drywall, it is always better to do things slowly and get it right the first time. This will save you a lot of time as well as a lot of money on costly repairs that you have to do later on if you are not patient when finishing your drywall.

The key to finishing drywalls is by practicing a lot. You have to remember that practice makes perfect and even professionals who install drywalls can make mistakes. You can follow the process of finishing drywalls but it is up to you to get the specific feel for applying the drywall mud and also to finish the drywall properly.

After you apply the drywall, the next step is to start applying the drywall tape to the joint seems. Try to use paper drywall tape on the corners and fiberglass tape for the flat seams. It will be a lot more convenient for you and it will also provide your drywall with better strength.

The great thing about the fiberglass drywall tape is that it has a self sticking adhesive, which can be rolled on before the drywall mud is applied. On the other hand, you have to apply a layer of drywall mud first before you apply the drywall paper tape.

Now, after applying the fiberglass tape, you can then apply the drywall joint compound. It is highly recommended that you use at least a 5 inch drywall trowel for this application in order to give the job a professional finish. For the drywall seams, use a 12 inch cement trowel as it works better.

The 12 inch cement trowel will allow you to spread more drywall joint compound on the seams for your first application. When you apply the first layer of joint compound, let it dry first before you apply the next layer. Doing this will allow you to continue spreading the drywall mud evenly up until the seams are flat and unnoticeable

After you have applied at least 3 coats of joint compound on your drywall and after it has dried thoroughly, the next step is to sand the area until it is smooth and ready to paint.

These are basically the steps on how to finish your drywall. Always remember that you may encounter some problems on the way. But, if you are careful and you follow the mentioned tips, you can be sure that you will be able to have a professional finish on your drywall.