HOW TO MAKE YOUR OWN BACKYARD FISH POND

Backyard Centerpiece

Homes with waterfront views and accents are admired by many. This is because being around water offers a feeling of beauty, allure, and serenity. Putting up your own water accent in your backyard, such as a fish pond, will also add that visual appeal. Make your yard alive with the soothing sounds of water in motion. Make your fish pond the focal point of your backyard.

However, there are some considerations before constructing one:

Climate

Consider the climate of your area. If your weather experiences winter times, then it is best if you make you fish pond deeper since the fish tend to hibernate at the bottom of the pond and naturally stop eating when the water temperature goes below 45 degrees.

If you live in a location where the pond will completely freeze over, it is imperative that a hole be created in the ice to help the fish remain alive. In this case, aquatic plants should be removed and placed indoors since they may not survive the cold temperature.

Filter

Consider the filtration system of your pond. There is what you call natural filtration where it is provided by the action of the moving water. If this is the case, considering the design of your system and the climate of your area, then you do not need a filter for the pond.

However, to know what is best for your pond, consult a pond professional concerning filtration. There are cartridge filters and biological filters available from shops that provide pond supplies.

Now, to get your backyard pond started:

First step. Make intelligent decisions by educating yourself.

Do not push through water gardening or pond building without knowing the essentials about it. Know what equipment are needed to be used. Find out if your yard is appropriate to hold such an accent. Is the climate compatible with your pond? Are you up for the regular maintenance it needs? Take into consideration the availability of supplies such as electricity, filtration, and water. Decide what type of pond are you willing to make, is it a small one? Or a large one?

Second step. Decide on the location of your pond.

Locate your pond in an area where the sun will be able to shine on it. Do not place it under the trees since it will cause a cleaning nightmare due to the falling leaves. Do not place your pond where runoff water tends to overflow. These will accumulate in your pond making it dirty and murky.

Determine the depth of your pond. The average depth of a back yard pond is between 18" to 24" usually. Make the outline of your pond and start digging it. Make steps in order to provide easy access to the pond during cleaning. These steps will also be perfect for holding potted plants just above the water. Make sure that the bottom is leveled as you dig.

Third step. Get hold of an appropriate sized pond liner.

In order to get the right pond liner size, take the width of your pond and add twice the depth of the pond, and then add 24 more inches. Measuring the length will be done using the similar formula. Now, drape the liner over the pond. Arrange it and place stones around the edges. Fourth step. Fill it up with water.

Start filling the pond with water. Fold large creases neatly and remove wrinkles as you fill the pond with water to make it les noticeable.

Fifth step. Install the needed equipment.

After filling it up with water, place filters, pumps, and lightings to the pond. Connect it to the electrical supply. Then add your fish and plants, and you are ready to go!

Enjoy!